When buying a bike, it is necessary to know all the particulars of a motorcycle. So, the urge to see if you can put 700c wheels on a 26-inch wheels bike is not wrong. Further, I will explain to you in detail whether the query is possible or not!
In advance of knowing, we need to understand the differences between 700c and 26-inch wheels.
Can I put 700c wheels on a 26-inch wheels bike?
Usually, a 700c wheel bike is faster than a 26-inch bike wheel. The diameter of a 700c wheel bike is bigger. This absolutely makes it easy for you to tackle broad smaller wheels that may be unable to tackle the bumps on your way. But it’s pretty easier as a larger wheel to roll over bumps in the road.
Also, 700c wheels are not so comprehensive.
Is it possible to put 70 wheels on a 26-inch bike?
Acceptably, it is impossible to put 700c wheels on a 26-inch rim. Because these two do not go suitable with each other.
To know why it is not suitable, keep reading below:
The rim brakes of the bike are not compatible with each other. Besides, the diameter of 700c is bigger than 26 inches. Also, the BSD of 700c is bigger than 26 inches; that’s where the difference comes from.
Here is a chart for you to understand the differences:
The chart shows that the diameter of a 26-inch wheel bike is nearly 670 mm, which equals 26.2 inches. And the diameter of a 700c wheel bike is 700 mm. The difference between the diameter is 30 mm.
The BSD has a difference of 71 mm. A 700c wheel BSD is wider than a 26-inch BSD.
Therefore, it is impossible to put 700c wheels on a 26-inch.
Nevertheless, there are some steps you can take to fit 700c wheels on a 26-inch wheel bike. However, you can avoid the conversion if you want to make better financial decisions.
Here is the following:
You will need BMX Caliper Brakes, V Brakes, Disc Brakes, and Caliper Brakes for the conversion.
Bmx Caliper Brakes
Installing Bmx Caliper Brakes helps 700c wheels to be fitted on 26-inch wheels. Its advantage is that it has a bigger reach and helps roll with bigger tires. Some examples are: Dia-Compe Bull Dog, Odyssey 1999
Standard Caliper Brakes
Standard Caliper Brakes allows the 700c wheels to adjust with a 26-inch wheel bike.
V Brakes are quite expensive. You can attach V brake mounts on the fork and seat stays.
You can also use front disc brakes with fixie rear brakes. This gives the brake a lot of power. However, you can use coaster brakes to replace this.
Downsides of the conversion
Tire options are limited
As we know, there is a lot of difference in the diameter; wide wheels for the smaller size area little tough.
So, having limited tire options comes as a downside of it.
The conversion gets costly to adjust 700C wheels on a 26-inch bike.
Because there is a lot of stuff you need to buy, such as caliper extenders, V brakes, disc brakes, rim modifications, etc., things would require a lot of bucks to spend. So, Considering these things, conversing won’t be a wise decision.
That said, buying expensive kinds of stuff for conversing is not better than buying compatible size wheels for the bike.
End of the day, this is an achievable hack!